The Only Producer For Coated Safety Helmet in Middle East
- Made in IRAN
- Compliant with EN-397: 2012
- Smart NFC chip for rapid identification and rescue
- Impact resistance tested to up to 2× the European standard
- Dual-layer crown with impact-resistant polycarbonate guard
- Resistant to acids, grease, oil, and solvents
- Quick-clean surface for fast, easy wipe-down
- Anti-UV protective coating for outstanding sun durability
- Enhanced gloss and a professional appearance
- Guaranteed shell color stability throughout service life
- 1-year valid warranty with after-sales support
- Continuous access to genuine, standard spare parts
- Supplied with up-to-date, freshly produced manufacture dates
- Full organizational color range, including gold and silver
1 - Ventilation Holes
The shell has ventilation holes to improve airflow and reduce heat build-up during long shifts.1 + - Adjustable ventilation:
user can open/close the vents to control the airflow according to ambient conditions.2 - Shell Material
The helmet shell is made of Acrylonitrile Butadiene Styrene (ABS) and is reinforced by a second layer: an impact-resistant polycarbonate (PC) crown cover.The appearance is similar to polyethylene, but with greater thermal & mechanical properties and less flexibility for this reason this material is so good for hot areas , because the ABS is much stronger for punching
The helmet has protection coating against solvents , acids, scratch & UV rays
And also prevent polymer degradation in the face of adverse conditions of the environment
3 - Accessory Slots
This helmet is able to connect accessories such as earmuffs, face shields and etc. through these slots4 - Dual-layer crown reinforced with impact-resistant PC
The crown area is designed as a dual layer: the outer layer is an impact-resistant polycarbonate (PC) cover, acting as the first barrier against top impacts. Impact energy is first absorbed and dispersed in this cover, then transferred to the ABS shell with reduced intensity; the result is higher safety against falling objects.5 - Front Board
It is a good place to print your logo or your company nameWe will print your logo and before the packing in the factory
Front Board also is a good place to install headlamps
6 - Headlamp strap holders (on all 4 sides of the shell)
Four dedicated fixtures on the shell lock the headlamp strap to prevent slipping or shifting during work. Having all four holders means virtually any headlamp model can be mounted securely on this helmet.7 - Standard 2-point chinstrap
The standard chinstrap on this model has two attachment points and fastens under the chin. A Quick-Release, side-release lock enables fast, reliable operation even with gloves. The chinstrap is purchased and installed separately.This type of helmet also allows the installation of a 4-point chin strap, similar to helmets used for working at heights. This means that if needed, you can use a 4-point chin strap for working at heights instead of the regular 2-point chin strap that attaches to the helmet.
7+ – Integrated emergency whistle
An emergency whistle is integrated into the chinstrap lock body; in an incident, a single blow immediately alerts nearby personnel and rescue teams a critical feature that can be life-saving. The whistle-equipped chinstrap must be ordered separately.8 - Ratchet System
The suspension has a ratchet system, This part is produced with the material of industrial gears which is used in fax machines and the lifetime is much longer than similar models9 - Hook Clamp
A belt hook clamp is supplied with each helmet. It attaches to the two rear connectors and allows the helmet to be hung from the wearer’s waist.10 - Replaceable Ratchet
This ratchet is replaceable, and the spare ratchet is available, although this kind of ratchet can not be easily damage, but in case of being damaged, there is no need to replace the entire suspension11 - Special Accessories Connectors
These connectors are a new feature that have been designed and patented by Persian Safety®With these connectors you can connect more functional components such as the sun shade, hook clamp and etc. to the helmet
